semi-circular wires
| Dimension Range | Thickness: 0.40 mm to 6.00 mm Width: 0.80 mm to 12.00 mm Other dimensions on request |
| Tolerances | The tolerance of thickness and width depends on the desired dimension and the edge design-specification according to customer requirements or according to Agreement. |
| Edge Design | Natural rolling Edges/round edges |  |
| by drawing or sketch | ||
| Sharp Edge/edge radius Setting |
| Surface | Depending on the material, delivery can be made with the following surface: For example: -bright rolled -low-friction -phosphated/bonded -galvanised -lightly Oiled -degreased design i.e. with a largely residue-free surface |
| Tensile strength | Depending on the material, delivery in different strength ranges is possible. | |
| z. B. Spring | – In accordance with EN 10270-1/en 10270-3 | |
| z. B. Stainless steel | – Spring Hard or RM > approx. 1250 n/mm ² | |
| z. B. C 9 D | – Hard rolled or RM > approx. 700 n/mm ² | |
| Delivery presentation | Rings or coils Almost all dimensions allow you to choose between the delivery package “coils” or “rings”. |
| Special design | If special requirements are placed on the wires you need, please contact Us. We are happy to check whether we can fulfill your Wishes. |
Application
- Wire Bending Parts:
Baskets | Shopping Cart | Displays | Fences | Wire Mesh | Hooks | Seat Constructions | Lock Mechanisms |
- Forming Parts:
Nails | Screws | Screw-in Hooks | Pencils | Tools | Closures | Nuts | Bullets | Automotive Parts |
- Turned:
Sleeves | Waves | Axles | Gears | Motor Studs | Automotive |
- Springs:
Flat Spring | Tension Spring | Pressure Spring | Leg Spring |
